TURBINE VACUUM PRODUCERS


(Power Flow Model PFT2205TH Shown)
  • Four Bearing Outboard Direct Drive Coupled Design, In-Field Serviceable
  • Heavy Duty Drive Coupling Assembly 
  • Polyurethane Paint Finish
  • Heavy Gauge Steel Construction
  • Motors - Premium Efficiency Totally Enclosed Fan Cooled Cast Iron Construction Standard
  • Cast Aluminum Intake & Exhaust Heads
  • Backward Curve Impellers
  • Free-Flow Non-Restrictive Performance
  • Premium Duty Precision Bearings Fan Cooled
  • Smooth, Quiet, Vibration-Free Operation
  • Exhaust Silencer Included
  • Two Year Warranty
STANDARD FEATURES OPTIONAL FEATURES
  • Quality
  • Performance Unequalled
  • Value
  • Industrial Duty Motor & Turbine Assembly Support Frame, Heavy Gauge Steel
  • Turbine Assembly 12 Gauge & 10 Gauge Steel Standard
  • Large Fin Cooling Area*
  • Cast Aluminum Intake & Exhaust Heads 356 T-6 Treated
  • Precision Bearings - Heavy Duty Design Application
  • Rear Bearing Cooling Fan*
  • High Efficient Backward curve Electronically Balanced Impellers*
  • Precision Ground, Straight-Arrowtm Shaft*
  • Drive Coupling Industrial Duty, Sized For Motor HP, RPM, Torque
  • Drive Coupling, Cooling Fan and Front Turbine Bearing Safety Guards
  • Cast Iron, Heavy Duty, Totally Enclosed Fan Cooled Motor, Energy Efficient, 208-230/460 Volt, 3-Phase, 60 Hz
  • Smooth, Quiet, Vibration Free Motor Turbine Operation*
  • Turbine Isolator Pads*
  • Three Year Motor Warranty**
  • Two Year Turbine Assembly Warranty**
  • Epoxy Primered*
  • PolyUrethane, Automotive Paint Finish With Ultraviolet Prohibitors*
  • Single Phase Motors, 208-230 Volt 60 Hz; 5, 7.5, & 10 H.P. Only
  • 50 Hz Motors
  • Explosion Proof Motors
  • Custom Turbine Stacking Support Frame*
  • Magnetic Starter Across The Line Non-Reversing
  • Custom Motor Control Panels*
  • Seismic Restraints
  • Turbine Weather Protector*
  • Custom Turbines

 


Every Vacutech Turbine Vacuum Producer is tested for a minimum of two hours under normal & abnormal operating conditions. This is done to ensure proper motor to turbine assembly alignment; operating temperature; bearing break-in; motor amperage draw; air flow; suction and quiet, vibration-free operation.

* Offered Exclusively by Vacutech

** Best Warranty In The Industry

"THERE IS NO EQUAL"

FILTERED SEPARATORS 



(Model SFS-3179 Shown)

 Filtered Separators are available in sizes from 30 to 500 sq.ft. of filtration to meet customer requirements.
STANDARD FEATURES OPTIONAL FEATURES
  • 12 Gauge Steel Construction Standard
  • Continuous MIG Welded Seams
  • Spun Top - Domed For Strength and Moisture Run-Off
  • 12 to 10 Gauge Steel Abrasion Wear Plates (Doubled For Beach and Desert Areas)*
  • 4" IPS Outlet (2 Each) To Turbine Vacuum Producer***
  • 4" IPS Vacuum Piping System Connection (2 Each) Provides Cyclonic Separation***
  • Internal Debris Screens To Protect Turbine Vacuum Producer*
  • 12 Gauge Steel Filter Bag Plate, Not Affected By Pressure Changes or Temperature
  • 8" Diameter Filter Bags, Mildew & Rot Proof - No tools Needed To Install or Remove
  • 102 Sq. Ft. of Air & Debris Filtration Area*
  • Large Door Openings For Easy Access To Filter Bags & Debris Container
  • All Door Openings Braced
  • One Piece Constant Seal Air Pocket Door Gaskets (EPDM), Expands & Contracts With Pressure Change - Attached To Separator*
  • Heavy Duty (Non-Bendable) Adjustable Door Clasp*
  • Full Length One-Piece Heavy Duty Piano Hinges On Both Doors
  • Large Debris Container Rust & Dent Proof
  • Self Leveling Feet (3 Each) Allows 1" Air Gap Under Separator
  • Epoxy Primered Inside & Out With Moisture Barrier
  • Polyurethane, Automotive Finish With Ultraviolet Prohibitors*
  • Two Year Warranty
  • Filter Bag Shaker Rotates 3600
  • Magnehelic Pressure Gauge - Tells You When To Clean Filter Bags*
  • Primary Separator, No Filter Bags. Protects Filtered Separator From Water, Mud, Snow, Shampoo & Abrasive Debris. Keeps Airflow & Suction Level Constant
  • Separators with washable and re-useable cartridge filters available
  • Stainless Steel Separators
  • Galvanized Separators
  • Static Grounded Filter Bags
  • Many Separator Models To Choose From For Greater Air/Debris Separation*
  • Custom Separators For Specific Requirements
  • Air Blow Down For Filter Bag Cleaning
  • Hopper Style Separators Available In Many Sizes To Meet System Requirements.

* Offered Exclusively by Vacutech

** Best Warranty In The Industry

*** Size Of Connection Is Based On System Air Flow And Number Of Users

"THERE IS NO EQUAL"